For correct and safe use, please follow these steps:

1. Surface Preparation
Clean the surface thoroughly to remove dust, grease, and moisture before application.

2. Application
Apply an even layer of SGG to the desired area.

3. Drying
Wait for full drying. Do not touch the surface during the drying process.

4. Ready for Use
Once dry, the surface is ready for use with its anti-slip effect.

ℹ️ Important Notes

It is recommended to perform a spot test on a small, inconspicuous area first.

Use only in a well-ventilated area.

In case of wear and tear, re-apply as needed.

🖌️ Included Application Brush
The kit includes a dedicated brush for uniform, precise, and mess-free application.

Assembling the Brush:

Attach the brush head to the included handle.

Ensure a secure connection before use.

Use & Maintenance:

Dip the brush into a suitable amount of the material and apply gently.

Do not apply heavy pressure.

Rinse the brush with water immediately after use.

Do not allow the material to dry on the brush.

This product has been tested in accordance with international safety standards, based on the manufacturer's data and testing.
Use this product strictly according to the instructions.

Certifications and test results refer to the product formula as provided by the manufacturer and are available for review upon request.

Usage Warnings:

For external use only.

Do not mix with other chemicals.

Keep out of reach of children.

Not for human consumption / Do not ingest.

Thoroughly clean the surface to remove grease, dirt, and residue.

Ensure the surface is completely dry and free of standing water.

Apply the material evenly using a roller, brush, or cloth.

Allow 15–20 minutes for the material to take effect.

Rinse the surface thoroughly with clean water or clean with a squeegee/cloth until all residue is removed.

The anti-slip effect is noticeable immediately after rinsing.

Uniform application is recommended to prevent shade variations on glossy surfaces.

Warnings and Safety

For indoor and outdoor use strictly according to instructions.

Keep out of reach of children.

Avoid contact with eyes. In case of contact, rinse immediately with water and seek medical advice if necessary.

Do not leave the material on the surface for more than 20 minutes.

It is recommended to perform a spot test in a hidden area before full application.

Slight changes may occur in the appearance of highly glossy surfaces.

Store in a cool, dry place, away from extreme heat, freezing, or direct sunlight.

Disclaimer: This product is supplied with detailed instructions. Warranty applies only to use in accordance with the guidelines. Use not according to instructions, on an unsuitable surface, or without a preliminary test is the sole responsibility of the user. The company is not liable for damages resulting from incorrect use or deviation from the instructions.

in accordance with the Consumer Protection Law, 5741-1981, and the Consumer Protection Regulations (Cancellation of a Transaction), 5771-2010:

A transaction may be canceled within 14 days from the date of receiving the product or the transaction disclosure document (whichever is later), provided that the product has not been opened, has not been used, is returned in its original and complete packaging, and subject to presenting proof of purchase.

Once the packaging has been opened and/or the product has been used, the transaction cannot be canceled and no refund will be issued, subject to the provisions of the law.

In the event of a defective product or a product supplied not in accordance with the order, the consumer shall be entitled to an exchange, repair, or refund in accordance with legal provisions and subject to inspection.